A landlord EICR costs between £75 and £149.99 for most homes. Below is every line of the bill: what’s in the price, what changes it, how repairs are priced, and how to tell if a quote is too cheap.
From £75/Extra consumer units £89.99 each/Repairs quoted separately, never assumed
Inspect + test every circuitincl
Consumer unit x1incl
PDF report in 48hincl
Tenant access arrangedincl
Itemised repair quoteincl
Renewal reminderincl
Fixed in writing before we book. Repairs are quoted separately and you choose who does them.
Inspect + test every circuitincl
Consumer unit x1incl
PDF report in 48hincl
Tenant access arrangedincl
Itemised repair quoteincl
Renewal reminderincl
Fixed in writing before we book. Repairs are quoted separately and you choose who does them.
Inspect + test every circuitincl
Consumer unit x1incl
Extra board, each£89.99
Outbuildings checkedincl
PDF report in 48hincl
Tenant access arrangedincl
Itemised repair quoteincl
Renewal reminderincl
Fixed in writing before we book. Repairs are quoted separately and you choose who does them.
Inspect + test every circuitincl
Consumer unit x1incl
PDF report in 48hincl
Tenant access arrangedincl
Itemised repair quoteincl
Renewal reminderincl
Fixed in writing before we book. Repairs are quoted separately and you choose who does them.
Quotes for the same flat can be far apart because they don’t include the same things. This is what our price covers, line by line, so you can compare like with like.
Visual inspection, every roomincl
Testing, every circuitincl
First consumer unitincl
Full EICR as PDF, 48hincl
Tenant access arrangedincl
Itemised repair quoteincl
Renewal reminderincl
Repairs, PAT, fire alarmseparate
STUDIO / 1 BED£75–98.99
2–3 BED£98.99
4–5 BED£109.99–149.99
Sockets, switches, light fittings, the consumer unit, bathroom zones, earthing and bonding to gas and water pipes. The inspector looks for heat damage, broken accessories, DIY wiring and anything that has aged out of safe use.
Continuity, insulation resistance, polarity, earth fault loop impedance and RCD trip times, recorded circuit by circuit. Inspectors sample accessories on each circuit as BS 7671 allows, and the report says how much was sampled. A quote that only “checks the sockets” is not a full EICR.
One board in most flats and 2–3 bed homes. Larger houses often have a second board for a loft conversion, extension or garage, and each extra board is £89.99. If your home has more than one, tell us on the phone and we’ll confirm the price in writing first.
The complete EICR: overall outcome, extent and limitations, every observation with its code, the schedule of circuits and test results, and the date the next inspection is due. It’s the document you give tenants, and the council if they ask.
We contact your tenant or letting agent and book a time that suits them, so you don’t have to coordinate it or be there. Power goes off for short spells during testing, and we tell the tenant beforehand.
If anything is coded C1, C2 or FI, you get a separate quote listing each fix and its price. You can use us, your own electrician, or get other quotes. The inspection price never depends on whether you book repairs.
We remind you before the next inspection is due, which is the date written on the report and no more than five years away. If the inspector sets a shorter interval, the reminder follows that date.
Repairs are quoted after the inspection. PAT testing of appliances you supply is separate (our PAT testing starts at £49.99 for up to 10 appliances). Fire alarm and emergency lighting certificates, and gas safety, are different checks by different specialists.
Each price covers the inspection, testing of every circuit and the full report. Extra consumer units are £89.99 each. We confirm your exact figure on the phone and in writing before anyone visits.
Studio flats, one-bed flats and small maisonettes
All circuitsincl
1 consumer unitincl
PDF in 48hincl
Tenant accessincl
Fixed in writing before we book
Flats, terraces and semis with two or three bedrooms
All circuitsincl
1 consumer unitincl
PDF in 48hincl
Tenant accessincl
Repair quoteincl
Fixed in writing before we book
Larger houses, extensions and loft conversions
All circuitsincl
1 consumer unitincl
Outbuildingsincl
PDF in 48hincl
Tenant accessincl
Repair quoteincl
Extra boards £89.99 each
The same fixed prices as everywhere else. Each ticket covers the inspection, testing of every circuit and the full report.
Inspection, testing and the full report
Inspection, testing and the full report
Inspection, testing and the full report
Inspection, testing and the full report
The Congestion Charge and parking may be added where they apply. Prices are for one rented home; for several, use the portfolio tally below.
Each property is priced by its own size, so the total is simply the sum of the bands. Add them one by one and the tape keeps count.
Prices: studio/1-bed £75–98.99, 2–3 bed £98.99, 4–5 bed £109.99–149.99, extra consumer units £89.99 each. London addresses are the same price. Your total is confirmed in writing for each address.
Every 5 years. Spread over 60 months, that’s £2.90–£3.30 a month.
A council can fine a landlord up to £40,000 for a single breach of the electrical safety regulations. That’s the price of 404 one-bed inspections at £98.99, the top of our band.
a month, for a studio or 1-bed spread over five years
a month for a 2–3 bed
a month for a 4–5 bed
In England, the Electrical Safety Standards in the Private Rented Sector Regulations 2020 set seven duties. A council can fine up to £40,000 for each one that’s breached, which is why the report and its paperwork matter as much as the inspection.
Sources: S.I. 2020/312, regulation 3; maximum raised from £30,000 to £40,000 by S.I. 2025/1043; gov.uk guidance.
By a qualified and competent person, sooner if the last report set a shorter date.
The first inspection has to happen before the tenancy starts. A report less than five years old still covers a new tenancy.
Within 28 days of the inspection.
Before they move in. Prospective tenants who ask in writing get one within 28 days.
Within 7 days of a written request.
C1, C2 and FI items within 28 days, or sooner if the report says so.
To the tenant and the council within 28 days of the work.
A council can also arrange urgent remedial work itself and recover the cost from the landlord. Landlords can make representations and appeal to the First-tier Tribunal.
Every problem on an EICR gets a code. Only three of the four codes are things you have to pay to fix. Choose a code to see what it means for your budget.
Risk of injury right now, such as exposed live parts or a burnt-out socket.
Within 28 days at the latest, or sooner if the report says. The inspector will usually make it safe before leaving, for example by isolating the circuit.
Unsatisfactory until it’s fixed.
Often small, such as a damaged accessory or a cable fault. Each fix is quoted on the spot, before any work starts.
Not dangerous this minute, but could become dangerous, for example missing earth bonding or unearthed metal fittings in a bathroom.
Within 28 days, or sooner if the report says. Then written confirmation to the tenant and council within 28 days of the work.
Unsatisfactory until it’s fixed.
Bonding, RCD protection and bathroom fittings are the usual fixes. Each one is quoted on the spot, with a fixed price before work starts.
Something needs looking into without delay, such as a low test reading or a circuit that couldn’t be traced.
The investigation must be done within 28 days, or sooner if the report says. It may turn into C1 or C2 work.
Unsatisfactory until it’s resolved.
Fault-finding is time-based, so ask for the price before it starts. Any repair it leads to is quoted separately.
The installation doesn’t meet the current edition of BS 7671 but isn’t unsafe, for example an older consumer unit without RCDs.
None. The law doesn’t require C3 work, though it would improve safety.
Can still be satisfactory if there are only C3s.
Your choice and your timing. A consumer unit replacement starts from £650 for a standard 6-way unit, if you plan one.
Tick what you think the inspector might find. These are the findings that come up most in rented homes, with the typical range for each fix.
Replaced and tested, with a Minor Works certificate.
Socket or switch replaced: quoted
Earth bonding to the gas and water pipes where they enter.
Main bonding fitted: quoted
Often in bathrooms. Swapped for double-insulated fittings.
Bathroom fittings replaced: quoted
Fault found, then the section repaired or replaced.
Cable section repaired: quoted
RCBOs or an RCD added. Coded C2 or C3 depending on the circuit; counted here as C2.
RCD protection added: quoted
Rewireable fuses or no RCDs. Usually a C3 recommendation unless it’s damaged. Replacing it is notifiable work.
Consumer unit replaced: from £650
For example, low insulation resistance on one circuit. Fault-finding is quoted before it starts.
Further investigation: quoted
Repairs are quoted on the spot after the inspection, item by item, and you choose who does the work. The consumer unit figure is our starting price for a standard 6-way unit.
Code meanings from the gov.uk guidance for landlords. Repairs are quoted on the spot; the consumer unit figure is our own starting price.
A very low price for a full EICR usually means less testing, a sample that’s too small, or a plan to make the money back on repairs. Enter a quote you’ve been given and see where it sits.
Every circuit is tested, not just a look round
It’s a full EICR with every circuit tested, not a visual check
The price is fixed in writing
The price is fixed in writing before the visit
It says when you’ll get the report
It says when you’ll get the report
The inspector’s scheme registration can be checked
The inspector’s registration can be checked on a public register
Repairs are quoted separately, with no obligation
Repairs are quoted separately and you can say no
“Our price” is our own fixed price for the same property size. We’re happy to quote against any written quote you’ve been given.
In England, the Tenant Fees Act 2019 limits what tenants can be asked to pay to rent, deposits and a short list of permitted payments. A safety inspection isn’t one of them, so the cost stays with the landlord. Wales has similar rules under its own fees legislation.
Tenant Fees Act 2019, s.1 and Sch. 1
An EICR during a letting is usually an allowable expense against rental income. Like-for-like repairs are usually allowable too. Upgrades that improve the property, such as a full rewire, may count as capital spending instead.
Check with your accountant or HMRC’s property income guidance
Some agents add an arrangement fee on top of the electrician’s price, others don’t. Ask your agent what the inspection itself costs. Booking direct means you pay the inspection price, and we can still send the report to your agent.
Reports can go to you, your agent, or both
Most rented homes pay for an EICR once every five years. The report can set a shorter date, and that date is the one that counts.
An EICR follows the model form in BS 7671. This is what’s in yours, and why each part matters when a tenant or council asks for it.
Satisfactory or unsatisfactory, in one word. Any C1, C2 or FI makes it unsatisfactory until the work is done.
What was tested, what was sampled, and anything that couldn’t be reached, such as a locked loft or boxed-in board.
Each problem with its location and code. This list is what your repair quote is built from.
Every circuit on every board: what it supplies, its protective device and cable size.
The measured readings for each circuit. This is the part a visual-only “check” can’t produce.
Signed by the inspector, with the date the next inspection is due. Five years at most for a rented home.
Tell us the address, size and who lives there.
One figure for your property, sent before anything is booked.
We book a time with your tenant or agent.
Every circuit tested. Power goes off in short spells.
The full EICR, ready to send to your tenants.
An itemised quote if needed, then a reminder before the next date.
The inspection costs the same, but the paperwork deadlines differ by nation. Call to check we have an inspector covering your area.
How often: At least every 5 years, or sooner if the report says
Copy to the tenant: Within 28 days; new tenants before they move in; council within 7 days of asking
Repairs: C1, C2, FI within 28 days, confirmed in writing
Also worth knowing: Penalty up to £40,000 per breach. Social housing is now covered as well.
How often: At least every 5 years
Copy to the tenant: To the contract-holder within 14 days of occupation
Repairs: Must be fit for human habitation under the Renting Homes (Wales) Act 2016
Also worth knowing: In force since 1 December 2022; converted contracts from 1 December 2023.
How often: At least every 5 years
Copy to the tenant: Keep a current report; the tribunal can ask for it if a tenant applies
Repairs: Fixed so the home meets the Repairing Standard
Also worth knowing: PAT testing of appliances you supply is also required. Guidance expects a SELECT, NICEIC or NAPIT registered electrician.
How often: At least every 5 years
Copy to the tenant: To the tenant; to the council on request
Repairs: Within 28 days
Also worth knowing: New tenancies from 1 April 2025; existing tenancies by 1 December 2025.
England: S.I. 2020/312 as amended. Wales: S.I. 2022/6 as amended by S.I. 2022/1076. Northern Ireland: Electrical Safety Standards for Private Tenancies Regulations (NI) 2024. Scotland: Housing (Scotland) Act 2006 and Scottish Government guidance.
One property · every circuit · PDF in 48h
Price fixed in writing · 020 3386 1854
TERMS OVERLEAF
You get one figure for your property before we book. The invoice matches it.
The full EICR as a PDF, ready to forward to tenants and the council.
We book a time that suits them and tell them about the short power cuts.
Each fix is priced separately. Use us, your own electrician, or nobody until you’ve compared.
Ahead of the date on your report.
Every inspector holds: City & Guilds 2391 (inspection and testing) or equivalent, working knowledge of BS 7671, photo ID, and calibrated test equipment. Their scheme registration number is given on request, so you can check it on the scheme’s public register.
Anything else? Call 020 3386 1854 and ask for a price in writing.
Our prices are £75–£98.99 for a studio or 1-bed, £98.99 for 2–3 beds and £109.99–£149.99 for 4–5 beds. Each extra consumer unit is £89.99. London addresses are the same price, and the Congestion Charge or parking may be added where they apply. Your exact price is fixed in writing before we book.
The number of circuits and boards, how easy the board is to reach, and how much testing is included. Some low quotes are a visual check only, or test a very small sample. Compare what’s on each quote, not just the total.
Yes. “Landlord electrical certificate” and “electrical safety certificate” are everyday names for the Electrical Installation Condition Report (EICR). A brand new or fully rewired home can use an Electrical Installation Certificate (EIC) instead, which also lasts five years.
No. The inspection price covers the inspection, testing and report. If anything is coded C1, C2 or FI, you get a separate itemised quote. You only have to fix those three codes, within 28 days. C3 items are recommendations.
The C1, C2 and FI items must be put right within 28 days, or sooner if the report says. The electrician who does the work gives you written confirmation, usually a Minor Works certificate or an EIC. You then send it, with the report, to the tenant and the council within 28 days. You don’t need a whole new EICR.
Not in England. The Tenant Fees Act 2019 only allows rent, deposits and a short list of permitted payments, and a safety inspection isn’t on it. Wales has similar rules. The landlord pays.
An EICR during a letting is usually an allowable expense against rental income, and like-for-like repairs usually are too. Improvements such as a full rewire may be capital spending. Ask your accountant about your own situation.
At least every five years for a rented home in England, Wales, Scotland and Northern Ireland, or sooner if the report sets an earlier date. You don’t need a new one for every new tenancy if the current report is still valid.
Be careful. A full EICR on a flat takes a qualified inspector a few hours plus writing up. Very low prices often mean a small sample, a visual-only check, or pressure to book expensive repairs. Ask what’s tested, when you get the report, and how to check the inspector’s scheme registration.
In England and Wales it isn’t required by law, but appliances you supply must be safe, and PAT testing is the usual way to show that. In Scotland it’s required for rented homes. Our PAT testing starts at £49.99 for up to 10 appliances.
Within 48 hours of the inspection, as a PDF you can forward to your tenants, your agent and the council.
We’ll call you back with a price in writing.
Can’t wait? Call 020 3386 1854
We use your details only to send your price. Nothing is booked until you agree.